fume sucker non-core indicators The key effect of dust removal equipment air bag is to store enough air compression to determine the stable working pressure of the gas path, and also has sewage treatment effect. A good method is to install the air bag of the dust removal equipment on one side of the two sides of the monopulse cloth bag type dust collector. If the air bag is installed at the front end of the clean brake air chamber of the bag filter, the indoor space of the bag chamber matching the bottom of the bag bag of the dust removal equipment cannot be installed, and the indoor space of the bag chamber is wasted. The gas is packaged in the middle of both sides of the bag dust collector, because the gas is packaged on both sides of the bag room, the indoor space of the bag room is flexibly used, the same over-anxious total area of steel consumption is reduced, and the elbow part of the blowpipe of the spray boiler is exposed to the outside of the net brake air chamber, and the engineering construction and installation is more convenient. Therefore, people should choose the side way to install the air bag as much as possible.

When using the pulse type bag filter equipment, special attention should be paid to the following problems to improve the operating speed of the equipment, reduce the failure rate, and properly extend the service life of the pulse type bag filter.

1, regular fuel maintenance of the dust collector: In order to improve the service life of the pulse type bag dust collector, the equipment should be regularly injected oil maintenance, fixed oil-water separator and dust collector air bag should be twice to remove oil, water and other impurities. In addition, in order to prevent the spontaneous combustion of dust caused by dust accumulation, the pulse bag dust collector should be cleaned regularly to keep the filter bag clean and unblocked, to maintain the beauty of the dust collector, and to properly extend the service life of the equipment.

2, regular maintenance equipment: pulse bag dust collector has many parts, including the shell, clean air room, air distribution box ash hopper, filter bag, electromagnetic pulse valve, etc. Each part plays an important role. In order to make the pulse type bag dust collector have the ideal operation effect, it is necessary to ensure that the components are intact and trouble-free. Therefore, it is necessary to regularly overhaul the equipment, check whether the pulse type bag dust collector has major component damage or failure, and timely maintenance treatment. A technician should be contacted to repair the dust collector. Do not easily remove parts during maintenance, otherwise it is easy to damage the internal structure of the vacuum cleaner, resulting in more and more failures.

fume sucker non-core indicators maintenance methods:

1, in the operation of machinery and equipment, it is necessary to set up full-time personnel to carry out management methods and do a good job of operation records.

2, the technical personnel should understand the basic principle of bag dust collector, characteristics, application standards, and grasp the adjustment of the main parameters of the operation and equipment maintenance.

3. Fill the grease on the machine and equipment on time.

4, often check the dust removal equipment single pulse ash system software is not all normal gas producer, if abnormal, the main check pulse solenoid valve pulse damper, relay is not working or damaged, and should be immediately repaired or replaced.

5, pulse solenoid valve such as common faults, should be cleaned immediately, such as internal residue, water and other dirty things, should be cleaned immediately, pulse damper damage should be replaced immediately.

fume sucker non-core indicators https://www.kaisenfilter.com/How-to-choose-a-fume-sucker.html